An excavator can look very reasonable in six photographs. You can see the bucket, the tracks, and perhaps a clean cab. What you can’t see is how it starts cold, what it does after warming up, or how much wear the undercarriage measurements would show.
At Keystone Equipment Sales & Service, we’d want you asking those questions before agreeing to a purchase. You’re buying used, so some wear shouldn’t be a surprise. The question is whether you understand it well enough to budget the work and still want the machine. No short checklist, including this one, can tell you everything that is wrong with an excavator.
What Work Are You Buying It For?
Put the listing beside the jobs you expect to do. Will the machine reach and dig deep enough, fit the available space, and leave room for its tail swing? Those answers help establish the size class you should be considering. Include attachments when considering transport weight. A machine you can’t legally and practically move with your transport setup isn’t quite the bargain it first appeared to be.
One question we would put to the seller is whether the proposed attachment has actually been matched to this machine. A thumb or other tool may connect physically and still have incompatible hydraulic requirements. Get the mounting details, flow, pressure, and return requirements checked. A line in an advert saying “auxiliary hydraulics” is a starting point for that discussion, not the answer.
Who Will Do The Inspection?
Someone familiar with the machine should handle the operating checks. Agree on that with the seller, using a qualified operator and a suitable controlled area with firm ground and adequate clearance. If you don’t know the controls, this isn’t the time to learn by trial and error. Everyone else stays clear of travel, swing, and attachment movement.
“Can we look at that leak more closely?” Only after the machine has been made safe for hands-on inspection. Attachments need lowering, the machine needs securing and shutting down, and the model’s procedure for stored pressure needs following. The engine stopping isn’t proof that hydraulic pressure has gone away. Nobody belongs under raised equipment, and nobody should feel for a leak with a hand: high-pressure fluid can inject through skin. A properly equipped technician should handle the investigation. It’s not worth turning a purchase inspection into an injury.
What Would Make You Ask For More Information?
A welded area on the boom, for example. It may have a documented repair behind it, or it may need specialist evaluation. We’d want that story before judging it. The same applies to cracks, damaged rods, wet fittings, and hoses with rubbing or abrasion. Fresh paint doesn’t answer any questions about the metal underneath.
Have the inspector evaluate pins and bushings too. Play may be ordinary wear or a repair you need to budget immediately. A freshly washed machine can be easier to look at, but leaks may only become apparent during a supervised operating check. Cleaning isn’t evidence of dishonesty; it just isn’t evidence of leak-free operation either.
Budget For The Undercarriage Work
We wouldn’t put a percentage on remaining undercarriage life from a photo. Let an experienced inspector measure and assess the tracks, rollers, idlers, sprockets, tension, and hardware for that system. Rubber tracks and steel-track systems require somewhat different attention. Leaks and uneven wear need explaining, whichever type you’re considering.
Then ask what the foreseeable work costs. Maybe the sale price plus that repair still suits your budget. Maybe it doesn’t. Either answer is more useful before buying than after you’ve committed to a machine whose undercarriage was never properly assessed.
Check The Machine Cold And Working
Ask whether you can see it start cold. An engine already warmed up won’t answer every starting question. The qualified operator should run the demonstration while the inspector watches for persistent smoke, odd noises, warnings, and starting difficulty. Operating temperature and cooling-system condition belong in the assessment as well, with the obvious limit that nobody opens a hot coolant cap. A burn won’t help establish the machine’s condition.
How drift does the manufacturer allow under the specified test conditions? If drift is excessive what further checks are needed? The hydraulic tests also need the operating conditions, including temperature. If movement seems weak or hesitant or the system makes noise the person would want that investigated before the person accepts an explanation that the system is normal.
The demonstration should also cover swing, travel, final drives and any blade or auxiliary circuit that is fitted. Have the inspector evaluate pulling, clunks, leakage, or weak travel as appropriate. While that is happening, observers stay outside the movement areas. You can ask for the machine to be safely stopped for a closer inspection; you don’t need to follow it around next to the moving tracks.
Can The Paperwork Back Up The Machine?
“These are low hours, aren’t they?” Perhaps, but we’d still want the serial number matched to the documents, the machine’s identity and ownership verified, and whatever service and repair records are available. Hours only tell part of the story. Ask the seller what work is outstanding and have the sale terms and any warranty put in writing. A verbal assurance is difficult to compare with a repair bill later.
Suppose the cab looks tidy. We’d still want more than a glance inside: a working monitor, intact belt and interlocks, usable controls, and the visibility needed to operate properly. The seat and climate control affect the working day as well. If a safety system doesn’t work, it needs repair before use, not a seller’s explanation of how to get around it. And a good demonstration still leaves room for an independent pre-purchase inspection. Neither it nor a checklist can guarantee the machine’s future condition.
We’re Keystone Equipment Sales & Service in New Castle, PA. Call us on (724) 856-6046 with the work you have in mind and the equipment questions you still need answered. If you’re comparing a machine and attachments, include the transport setup too. Those details give us something useful to discuss alongside the available equipment and asking price.