KEYSTONE EQUIPMENT SALES & SERVICE

What Should You Check Before Buying Used Heavy Equipment?

Purchasing second hand heavy machinery can be an excellent option due to cost savings, availability and sometimes the functionality of the machine. However, if certain things are not considered, purchasing second hand heavy equipment can turn into a costly problem and cause frustration!

Here at Keystone Equipment Sales Services, we assist Contractors, landowners, and Operators in obtaining reliable machinery and attachments. In regards to considering what to look for before purchasing second hand heavy equipment, it is very important to understand what has happened to the machine in order to know what costs may occur in the future.

Below are a few of the things we suggest you look for in second hand equipment (skid steers / mini excavators/dozers/loaders/backhoes & attachments).

Machine Inspection

Look for any clear issues.

Even before turning the key, take a good look around the machine. Although we can pick up on clear issues, we can also pick up on clues. Are there inconsistencies in the paint, new stickers over damage? Or are there inconsistent welds? While this doesn’t necessarily mean the machine shouldn’t be purchased, we should be asking questions.

Hours On Meter

While hours on the meter are very useful, it is more important to know if maintenance has been carried out. If a machine has more hours but has been regularly maintained, it may be a better purchase than a low-hour machine which has been left outside with old oils and poor filter maintenance. Look for consistency between the hours and wear. If the machine has 1800 hours on it, but the foot pedals have been worn very smooth, and the seat looks very well used, take more time to consider this machine.

Leaking

Look out for any leaks. Underneath the machine, in the engine bay, Hydraulic pumps, Cylinders & Final Drives. However, we should also look at how clean the machine is. If the engine compartment is very clean, this may be a good sign; however, it could be the case that they are cleaning to hide leaks. If very clean, we will take a closer look at hose crimps, connections, and areas where grime would typically build up.

Smell

Burnt hydraulic oil can be smelt easily. This will usually indicate overheating, overexertion, or poor components.

Hydraulic Systems

As hydraulics are so important in many machines, it is a good idea to really check these. Cycle through all functions and listen for any whining, chattering, or laboring sounds. Also, look out for any jerky movements or sluggish responses. Cylinders should not creep.

On machines with secondary hydraulic circuits, we would carry out tests on these as well. While the primary functions may be working well, if the machine is intended for use with a hydraulic breaker, grapple, mower or auger, we want to ensure that the secondary hydraulic system is in good condition. It is much better to find this out in the yard than after purchasing an attachment and not being able to utilize it properly.

Pin & Bush Inspection

Worn pins and bushes can indicate a lot of information about how the machine has been used. On excavators/backhoes, check the bucket linkage, stick, boom, and swing. On skid steers, look at the quick attach section and lift arms. Too much play can create issues with accurate grading and digging. It can also lead to increased wear on components.

Check for cracks in areas of high stress. Cracks in welded joints and structural parts can indicate a poor repair. If professionally repaired, this may be fine. If rushed, it may be an indication of a problem.

Undercarriage/Tyre Inspection

Tracked machines can be costly due to their undercarriage. Check tracks, rollers, idlers and sprockets. If the undercarriage appears to be worn, despite the machine appearing cheap, once costs for parts and labor are considered, the machine may not be as cheap as expected.

On wheeled machines, tires can indicate lots. Uneven wear can indicate misalignment or worn components, or simply hard use on rough terrain. Check for cracks and dry rot on the sides. Inconsistencies in tire sizes can be an indication that the machine has been pieced together.

Cold Start

A machine starting well when cold will perform differently to a machine which has to run for 20 minutes to start smoothly. If possible, we will test in cold conditions. Observe if the machine is creating excessive smoke, is difficult to start, is running roughly, or is displaying faults.

Once running, observe temperatures, pay attention to any changes, and check for leaks once pressures have built and components are heated.

Work It Hard

Driving the machine around the yard is not enough. Try doing the types of work the machine will be doing. For example, try digging in a pile, curling under load, pushing into earth, lifting weights. With travel motors, try moving and turning. If power is dropping, or handling feels inconsistent, or the machine seems to be working fine until put under load, then be wary.

With skid steers/loaders, check how it runs under load. On excavators, move it in swing mode and check the response. Weak pumps, tired engines, and worn drive systems can be picked up on here.

Maintenance History

We wouldn’t expect perfect documentation; however, it is very important to know answers to the following questions. What oil was used? How regularly were filters changed? Any large repairs? Any recent hydraulic maintenance? If people can’t answer simple questions, it is a risk. We will factor this risk into our decision.

Document Checks To Make

Serial Number & Ownership

Check that the serial number matches the documents. Ensure there are no oddities with the ownership.

Service History – Or At Least A Pattern

Even knowing a simple pattern can help. Hydraulic filters changed every 500 hours is very helpful to know.

Consider Suitability

Even if the machine is in great condition, it may not be the correct choice. Be sure to consider what you will be using it for, where it will be used, and required attachments. Weight capacity, lifting capacity, reach, hydraulic pressure, and transport requirements can affect the correct choice significantly. We want to ensure that you are getting a machine that will make you money, save you time, or maintain your land with ease and no surprises.

Here at Keystone Equipment Sales Services in New Castle, PA, we can help. We offer clear advice, practical solutions, and a friendly service throughout your decision making process. If you are considering purchasing second hand heavy equipment and would like us to take a look for you, or to help you find a reliable machine with less hassle, please give us a call on (724) 856-6046. We can help you consider your options and give you confidence in your choice!